Ink-jet Banner Stand printers, after all, is the machine and machine applications will inevitably encounter a problem. These problems or from the application, or from the failure. In short, these troubling the end result is that the photo printing cannot be continued normally. To give you a better address these issues when the photo printing, guarantee printing smoothly, I took home photo printer using a fault, and resolved to do it one by one, and hope that these experiences can bring inspiration to everyone in the future.
Problem: printer when you post, the word wagon and motor making noise. This appears every time you power on, but does not appear in the printing process and other issues, this phenomenon is normal?
Answer: this is obviously not normal. Although the Banner Stand printer printer in the application will appear when the sound, but the word wagon and motor noise does not occur. After this, users should first check whether there is a foreign body to enter. Foreign bodies entering the printer may cause Word parts such as car, motor load to increase scratch or rub the belt, then the user can refer to your device's installation manual carefully remove foreign body. If the foreign body is stuck inside the machine or deeper, it is recommended to maintain professional maintenance.
It is worth mentioning that, printers are these kinds of failures occur, mainly because of the poor quality compatible ink cartridges and continuous ink system, this ink can easily leak, leaking ink can increase printer running resistance of mechanical parts, continuous ink supply system of additional pipeline will bring additional burdens to the word car, motor. Above faults can occur. In particular continuous ink can cause a lot of ink spilled on the pump attachment, causing pump attachment due to poor campaign issued a different sound. When users need to replace the pump attachment, at the same time to clean up.
Question: How does not recognize the ink cartridge the printer, replace the nozzle still occur.
Answer: the printer does not recognize the ink cartridge may be because of two reasons, partly because the print cartridge and the printer is not compatible caused cannot be recognized by the printer. At this time, users should replace matching original ink cartridges. Chip is pollution there is a printer, print cartridge is not recognized. When users need to clean up the printer identification chip, fault can be resolved.
Problem three: printer print without ink, when you perform a nozzle clean out the ink, print the cartridge properly but no ink.
Answer: the fault is a physical failure, under normal circumstances, this fault line is because the print head part is damaged, need to replace the print head to normal use, so users can only replace the print head.